DTH DRILLING RIG -KM810MTRAUTO- Model Top drive drill rig is capable of drilling in different formations, such as a medium to hard rock by DTH unconsolidated / Alluvial formations using Air / Water / Water flush by rotary method, up to a depth of 810 Mtr(2000 Feet), under favorable drilling conditions,

The following are the detailed specifications DTH Drilling Rig Machines.

• Drilling Diameter - 8"-17"(203mm-432mm)
• Drilling Depth- 2650 Feet (810 Mtrs)
• Formation - Soft / Medium / Hard
• PRIME MOVER OF Hydraulic Power Pack  - Truck Mounted Rig with Power from

TRUCK ENGINE/DECK ENGINE

• CARRIER / MOUNTING- Separate Truck for Mounting of Rig & Air Compressor 
• COMPRESSOR- Suitable Compressor- ELGI / ATLAS COPCO / IR
• Maximum Operating Pressure- 210 Kg/Cm2
• Hydraulic Oil Tank Capacity- 800 Ltrs
• MAST Capacity (WT)- 40 Tons
• MAST Capacity (Rod Handling)- 20 Feet (6.1 Mtrs)
• Pull Up Speed- 20 Mtrs/Min
• Pull Up Force- 20940 Kgfm
• Pull Down Force- 10680 Kgfm
• ROTATION SPEED- 0-100
• Rotary Head TORQUE- 490 Kgm
• ROD CHANGER- Manually Operated Rod Changer
• Note : Due to continuous development all the above specifications are subject to change