MTR MANUAL

Product Description

DTH DRILLING RIG -KE490MTRMANUAL- Model Top drive drill rig is capable of drilling in different formations, such as a medium to hard rock by DTH unconsolidated / Alluvial formations using Air / Water / Water flush by rotary method, up to a depth of 610 Mtr(2000 Feet), under favorable drilling conditions,

The following are the detailed specifications DTH Drilling Rig Machines.

Drilling Diameter                                  6.5, 9, 10 12 (Over Burden 

Drilling Depth                                  2000 Feet (610 Mtrs) 

Application                                          Water Well Drilling 

Formation                                          Soft / Medium / Hard 

Mast                                                      Hydraulic Cylinder With Pulley & Wire Rope

                                                                 Max. Pull Up Force 15500 Kgs

                                                                 Max. Pull Down Force 7500 Kgs

                                                                 Max. Pull Up Speed 45 Meter/Minute

Prime Mover                                          Truck Engine As Per Customer Request

Hydraulic system                                   Max. Working Pressure 320 Kg/cm2

MAST Construction - Sturdy Structural Channel 

Pull Up Speed - 20 Mtrs/Min 

Pull Down Speed - 30 Mtrs/Min 

Pull Up Force - 20940 Kgfm 

Pull Down Force - 10680 Kgfm 

ROTATION SPEED - 0-120 

Note : Due to continuous development all the above specifications are subject to change