DTH DRILLING RIG -KE345MTRAUTO Model, Top drive drill rig is capable of drilling in different formations, such as a medium to hard rock by DTH unconsolidated / Alluvial formations using Air / Water / Water flush by rotary method, up to a depth of 345 Mtr(1130 Feet), under favorable drilling conditions,

The following are the detailed specifications DTH Drilling Rig Machines.

•  Drilling Diameter -  6.0" - 10"(152mm - 254mm) 
•  Drilling Depth - 1128 Feet (345 Mtrs) 
• Formation - Soft / Medium / Hard 
• PRIME MOVER OF Hydraulic Power Pack    - Truck Mounted Rig with Power from

TRUCK ENGINE/DECK ENGINE 

• CARRIER / MOUNTING - Truck for Mounting of Rig & Air Compressor 
•  COMPRESSOR - Suitable Compressor ELGI /ATLAS COPCO /IR 
• Maximum Operating Pressure      - 230 Kg/Cm2 
• Hydraulic Oil Tank Capacity - 500 Ltrs 
• MAST Capacity (WT) -  26 Tons 
• MAST Capacity (Rod Handling) -  12 Feet (3.1 Mtrs) 
• Pull Up Speed -  21 Mtrs/Min 
• Pull Down Speed - 33 Mtrs/Min 
• Pull Up Force - 20940 Kgfm 
• Pull Down Force - 10680 Kgfm 
• ROTATION SPEED - 0-135 

Note : Due to continuous development all the above specifications are subject to change

Product details